Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Each end has keyway
NSN
National Stock Number:
TXT
Description:
Helical Gearshaft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
30.625 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
30.625 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Strategic sealift conversion ships class
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
25
MRC:
The length of a straight line which passes through the center of a gear,and terminates at the outside circumference.AJWS
Gear Outside Diameter:
4.647 inches
MRC:
Indicates the type of shaft end provided.ANJS
Shaft End Type:
Keyway flat and threaded internal
MRC:
The number of teeth per inch of pitch diameter.AQGH
Diametral Pitch:
6
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
3.250 inches
MRC:
Indicates the type of shaft included on the item.CRSJ
Shaft Type:
Shouldered
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Single helix
MRC:
The direction the teeth curve when viewed from the edge of the item.CWNM
Tooth Direction:
Right
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
The measurement of the helix angle on the item.CWPZ
Helix Angle:
15.0000 degrees
MRC:
The chemical compound or mechanical mixture properties of which the shaft is fabricated.CYEQ
Shaft Material:
Steel comp 4340
MRC:
The chemical compound or mechanical mixture properties of which the gear is fabricated.CYER
Gear Material:
Steel comp 4340
MRC:
The numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale and its location.CYES
Hardness Rating And Location:
340.0 brinell standard teeth and 380.0 brinell standard teeth
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the largest circumference.CYET
Shaft Largest Diameter:
3.250 inches
MRC:
Indicates the location of the gear on the shaft.CYEU
Gear Location On Shaft:
Off center between ends of shaft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the longer of two shaft segments.CYEV
Longer Shaft Segment Length:
20.375 inches
MRC:
Designates the size of the shaft end included on the item.CYEW
Shaft End Size:
2.375 inches and 2.501 inches
