Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Two through holes 0.150 in. Min 0.160 in. Maximum diameter 180 degrees apart on 0.772 in. Diameter bolt circle
NSN
National Stock Number:
TXT
Description:
Keyway Washer
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.3895 inches and 0.3900 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.020 inches and 1.030 inches
MRC:
A measurement taken at right angles to the length of an internal keyway,in distinction from thickness.ABLM
Internal Keyway Width:
Between 0.115 inches and 0.135 inches
Distance From Centerline To Bottom Of Internal Keyway:
Between 0.320 inches and 0.330 inches
MRC:
The number of internal keyways included.ABMV
Internal Keyway Quantity:
2
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.155 inches and 0.165 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 32.0 rockwell c and 38.0 rockwell c
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Aaub
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6322 assn standard single material response
