Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Mounting pad on short leg
NSN
National Stock Number:
TXT
Description:
Double Angle Bracket
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Stamped
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 0.730 inches and 0.770 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 2.352 inches and 2.400 inches
MRC:
The means provided to add strength and/or protection to the item.AFPW
Reinforcement Method (non-core):
Turned edge both ends
MRC:
The means provided to add strength and/or protection to the item.AFPW
Reinforcement Method:
Turned edge
Second Leg Width:
Between 0.490 inches and 0.510 inches
First Leg Hole Diameter:
Between 0.280 inches and 0.285 inches
Second Leg Hole Diameter:
Between 0.210 inches and 0.230 inches
Second Leg Distance From Edge To Hole Center Along Width:
0.250 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 0.210 inches and 0.230 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.490 inches and 0.510 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.032 inches and 0.040 inches
Center Section Height:
Between 0.900 inches and 1.000 inches
Center Section Width:
Between 0.490 inches and 0.510 inches
Center Section Thickness:
Between 0.032 inches and 0.040 inches
First Leg Width:
Between 0.490 inches and 0.510 inches
First Leg Distance From Edge To Hole Center Along Width:
0.250 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 0.210 inches and 0.230 inches
First Leg End Radius:
Between 0.350 inches and 0.390 inches
Second Leg End Radius:
Between 0.350 inches and 0.390 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One hole
First Leg Angle:
90.0 degrees
Second Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 321
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5510 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Double angle
