Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Bevel Gear
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain, solid
MRC:
The means used to attach the item.ABSX
Attachment Method:
Mounting hole
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
2.8000 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
21
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Plain both ends
MRC:
Indicates the type and number of mounting holes provided on the item.CTQY
Mounting Hole Type And Quantity:
1 plain transversely through hub, first end
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
2.815 inches
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
1.046 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Spiral
MRC:
The direction the teeth curve when viewed from the edge of the item.CWNM
Tooth Direction:
Right
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
15.0000 degrees
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.500 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
1.000 inches both ends
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
1.938 inches first end
MRC:
The nominal length of a straight line which passes through the center of the first groove,and terminates at the circumference.CWYD
First Groove Diameter:
1.251 inches second end
MRC:
The nominal length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.CWZK
Mounting Hole Diameter:
0.250 inches transversely through hub, first end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8620
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard single material response and aisi/sae 862 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Peripheral face, back hub protruding
