Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Angle between keyways 180 deg
NSN
National Stock Number:
TXT
Description:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Woodruff keyway
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved and flat keyway
Second End Groove Width:
Between 0.0300 inches and 0.0330 inches
Second End Groove Diameter:
Between 0.4170 inches and 0.4270 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.080 inches
MRC:
A measurement taken at right angles to the length of the keyway at the first end,in distinction from thickness.AMCZ
First End Keyway Width:
Between 0.0928 inches and 0.0943 inches
First End External Keyway Length:
0.500 inches
First End Distance From Keyway Center To End:
0.320 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.4985 inches and 0.4990 inches
Second End Distance From End To Groove:
Between 0.070 inches and 0.073 inches
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
Between 0.1270 inches and 0.1300 inches
Second End External Keyway Length:
Between 0.945 inches and 0.958 inches
MRC:
A measurement between specified points of the keyway at the second end.AMFT
Second End Keyway Depth:
Between 0.072 inches and 0.081 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.4980 inches and 0.4990 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
Between 0.1270 inches and 0.1300 inches
Second End Distance From Hole Center To End:
Between 0.465 inches and 0.475 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
5
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
0.562 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 440c
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763 federal specification single material response
