Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Two blind holes 0.749 in. Min 0.758 in. Maximum diameter 3.000 in. Deep both ends
NSN
National Stock Number:
TXT
Description:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 1.2463 inches and 1.2479 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
6.450 inches
Undercut Diameter:
Between 1.191 inches and 1.199 inches
Under Head Length:
6.750 inches
Undercut Width:
Between 0.056 inches and 0.060 inches
Second Undercut Width:
0.056 inches
Second Undercut Diameter:
Between 1.197 inches and 1.207 inches
First End Taper Length:
0.100 inches
First End Taper Angle:
Between 13.0 degrees and 17.0 degrees
Pin Head Diameter:
1.440 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
250.0 microinches all other surfaces
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches outside diameter
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.125 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp e4340 or steel comp 4340
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-5000 military specification all material responses
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
