Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Manufacturers suggested name valve outline, regulating, fluid pressure & shutoff - 3.00 inch diameter; inlet pressure 150 psig max; regulated pressure 45 to 55 psig; inlet temp 640 degrees feh; ambient temp range -65 to +250 degrees feh; flow 140 lb per min max; full open inlet pressure 12 psig max; normal position spring loaded closed; current 1.0 amp maximum at 28 vdc; height 9.10 inches max, width 7.85 inches max, length 7.10 inches max; wt 7.75 lbs max
NSN
National Stock Number:
TXT
Description:
Butterfly Valve
MRC:
The maximum temperature at which the item is rated to operate for an extended period of time.AEHZ
Maximum Operating Temp:
250.0 degrees fahrenheit single response
MRC:
The minimum temperature at which the item is designed to operate.AEQJ
Minimum Operating Temp:
-65.0 degrees fahrenheit
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Applicable t.O. 15a2-1-143, fig 10-3
MRC:
The electrical current rating,expressed in amperes.AMPS
Current Rating In Amps:
1.000
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Solenoid
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Round all ends
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange all ends
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Manual override
MRC:
Designates the size of the valve.CCFG
Valve Size:
3.000 inches
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
150.0 pounds per square inch single response
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
16.0 dc and 30.0 dc
MRC:
The predetermined pressure at which the item is calibrated to open.CSDC
Opening Pressure Setting:
12.0 pounds per square inch
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
3.695 inches all ends
MRC:
The face to face distance.CWCF
Face To Face Distance:
4.010 inches
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
0.110 inches all ends
MRC:
The design of the flange face.CWDF
Flange Face Design:
Plain all ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Air single response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Err-090
