Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Shaft Collar
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.812 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.281 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.4995 inches and 0.5005 inches
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
2
MRC:
A measurement of the amount of turning necessary to bring one hole into coincidence with another,expressed in degrees.AHYG
Angle Between Centerlines Of Securing Holes In Deg:
180.0
MRC:
Indicates the type of securing hole and the location.CQKB
Securing Hole Type And Location:
Unthreaded-countersunk all holes
MRC:
The countersunk hole angle,expressed in degrees,and the location.CQNY
Countersunk Hole Angle In Deg And Location:
90.0 all holes
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the inside circumference,and the location.CRZW
Hole Diameter And Location:
0.1285 inches all holes
MRC:
The length of a straight line which passes through the center of the largest dimension of a countersink,and terminates at the inner circumference,and the location.CSFB
Countersink Major Diameter And Location:
0.1875 inches all holes
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, qq-s-630-canceled
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp b1006 or steel comp b1010 or steel comp mb1006 or steel comp m1008 or steel comp m1010 or steel comp m1012 or steel comp m1015 or steel comp m1017 or steel comp m1020 or steel comp m1023 or steel comp m1025 or steel comp m1031 or steel comp m1044 or steel comp mb1010 or steel comp 1008 or steel comp 1010 or steel comp 1012 or steel comp 1015 or steel comp 1017 or steel comp 1020 or steel comp 1023 or steel comp 1025 or steel comp 1031 or steel comp 1006
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-630-canceled federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain round
