Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Pitch diameter: 3.312 in.
NSN
National Stock Number:
TXT
Description:
Rigid Shaft Coupling
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.4950 inches and 0.5050 inches
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
3.2500 inches both ends and 3.2550 inches both ends
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
3.2500 inches and 3.2550 inches both ends
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
3.4240 inches both ends and 3.4440 inches both ends
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
3.4240 inches and 3.4440 inches both ends
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
53 first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined first end
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.000 first end
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Involute first end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Unthreaded hole
MRC:
The number of unthreaded holes provided.BSNS
Unthreaded Hole Quantity:
4
MRC:
The chemical compound or mechanical mixture properties of which the body is fabricated.CQRG
Body Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6322 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Silver
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Ams 2410 assn standard single treatment response
