Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
First inside corner chamfered 40.0 degrees min to 50.0 degrees maximum by 0.0200 in. Min to 0.0500 in. Maximum long
NSN
National Stock Number:
TXT
Description:
Thrust Washer Bearing
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Rectangular
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 4.4900 inches and 4.4940 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.ABMX
Center Hole Shape:
Round
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 4.3163 inches and 4.3180 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.4540 inches and 0.4560 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered second inside corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square first inside corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square first outside corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square second outside corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches left side
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches right side
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8740
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
