Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Double Angle Bracket
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Machined
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 1.415 inches and 1.555 inches
First Leg Hole Diameter:
0.281 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 0.455 inches and 0.525 inches
Second Leg Slot Length:
Between 0.710 inches and 0.730 inches
Second Leg Slot Width:
Between 0.213 inches and 0.223 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.115 inches and 0.135 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.115 inches and 0.135 inches
Center Section Width:
Between 1.620 inches and 1.700 inches
Center Section Thickness:
Between 0.115 inches and 0.135 inches
First Leg Width:
Between 2.010 inches and 2.090 inches
First Leg Distance Between Hole Centers Along Width:
Between 1.300 inches and 1.320 inches
First Leg Distance Between Upper Hole Centers Along Width:
Between 1.300 inches and 1.320 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.190 inches and 0.370 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 0.240 inches and 0.280 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
End radius and tapered
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One slot
First Leg Angle:
90.0 degrees
Second Leg Angle:
135.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 321
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5510 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Double angle
