Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
T.O. 31p3-2tps-43-4
NSN
National Stock Number:
TXT
Description:
Waveguide Assembly
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Internal, rectangular external, rectangular
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
An/tps-43
MRC:
The number of flanges provided with the item.AHSF
Flange Quantity:
2
Flange Inside Width:
2.840 inches all flanges
Flange Outside Width:
4.250 inches all flanges
Flange Outside Height:
2.750 inches all flanges
MRC:
A measurement between specified points on the flange,in distinction from height.AHTD
Flange Depth:
0.360 inches all flanges
MRC:
The ratio of the maximum to the minimum amplitude of pressure /voltage/ measured along the path of the waves.AHTW
Voltage Standing Wave Ratio:
1.08
MRC:
The difference in the amount of energy available before and after the insertion of an apparatus in a transmission system,expressed in decibels.AHTX
Insertion Loss In Decibels:
0.02
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
34.0 pounds per square inch gage
Waveguide Outside Width:
3.000 inches
Waveguide Inside Width:
2.840 inches
Waveguide Inside Height:
1.340 inches
Waveguide Outside Height:
1.500 inches
Waveguide Longer Offset Distance:
8.000 inches
MRC:
The type and number of facilities by which the flange is connected.CSQT
Flange Connecting Facility And Quantity:
8 threaded hole all flanges single connection facility
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.CTCJ
Flange Style:
Contact type all flanges
Waveguide Offset Distance:
8.000 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum all flange
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Bend type
