Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
One hole 0.090 in.Min diameter and 0.110 in.Max diameter located 0.855 in. From the center of either hole along the width. Material non-asbestos
NSN
National Stock Number:
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.230 inches and 0.250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 3.980 inches and 4.020 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 2.430 inches and 2.470 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
Between 0.080 inches and 0.120 inches
Outside Corner Radius:
Between 0.360 inches and 0.380 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
Between 1.200 inches and 1.220 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
Between 2.850 inches and 2.870 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
1.710 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
1.630 inches
Outside Edge To Bolt Hole Center Distance Along Width:
Between 0.360 inches and 0.380 inches
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.360 inches and 0.380 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.062 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
6
Outside Edge To Inside Edge Smallest Distance Along Width:
Between 0.360 inches and 0.380 inches
Outside Edge To Inside Edge Smallest Distance Along Length:
Between 0.360 inches and 0.380 inches
MRC:
Indicates the type of product that meets or exceeds the government guidelines for environmentally preferred characteristics.ENAC
Environmental Attribute Code:
Asbestos alternative products
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
