change location
321-802-5889
321-733-7477
Part Information
The spanner wrench has two dowel pins on the interfacing end that are 1.00 inch apart center to center. These dowel pins are 0.067 inches in diameter, 0.215 inches in length and will interface with the holes in the externally threaded nut (p/n 6430786-1). The tool has a 3/8 inch square drive to allow the externally threaded nut to be removed and torqued during replacement.The externally threaded nut must be torqued to 50 +/-5 inch during replacement. It has a square cut out in the center to accept a 3/8 inch ratchet for removal, or at 3/8 inch torque wrench for replacemnt of the externally threaded nut.Made from crs (cold rolled steel
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 3642AS100-1 | 2 | KE | 3 | 30003 |
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by then OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |