Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Cylinder graduated laboratory mixing 100 ml cap plastic
NSN
National Stock Number:
TXT
Description:
Laboratory Graduated Cylinder
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Any acceptable
MRC:
An indication of the marking(s) on the scale.ASTW
Scale Marking:
Every fifth graduation numbered
MRC:
A measurement of the capacity of an item.BBLT
Capacity Rating:
100.000 milliliters
MRC:
A designation of the function which is calibrated.BJBS
Calibration Function:
To contain
MRC:
Indicates the type of container/s/ or supporting device/s/ which is in direct contact with the item.CQCT
Primary Container Type:
Case
MRC:
Indicates the increments of measure on the scale.CQPX
Scale Graduation Unit:
1.0 milliliters single interval single scale
MRC:
The number of items of supply within each primary container.CQTF
Primary Container Unit Quantity:
1
MRC:
The process used in marking the graduations on the item.CRLY
Graduation Marking Method:
Molded
MRC:
Indicates the reading direction of the scale.CSTJ
Scale Reading Direction:
Bottom to top outside single scale
MRC:
Indicates the range of the increments of measure on the scale.CTBL
Scale Graduation Unit Range:
+10.0/+100.0 milliliters single interval single scale
MRC:
The measured weight of the exterior container.ECWT
Exterior Container Weight:
56.00 pounds
MRC:
A measurement of volume taken by multiplying the length by the width by the height of the exterior container and rendered in cubic units.EXME
Exterior Container Cubic Measure:
6.20 cubic feet
MRC:
The number of units of issue placed inside the exterior container.EXQT
Exterior Container Quantity:
144
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Mixing; w/polyethylene stopper
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polypropylene
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polypropylene
MRC:
The number of wraps,boxes,or bundles,which contains two or more units of issue,placed inside an exterior container.PKQT
Intermediate Package Quantity:
12
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Pour-out
MRC:
A measurement of volume taken by multiplying the length by the width by the height of the unit of issue and rendered in cubic units.SUCB
Unit Of Issue Cube:
0.044 cubic feet
MRC:
The measured weight of the actual container(s) or supporting device(s) which is in direct contact with the item and its contents.SUWT
Unit Of Issue Weight:
0.23 pounds
