Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Groove on od 0.104 in.W by 2.400 in.Dia 0.080 in.From flange, 2nd groove on od 0.620 in.W by 2.060 in.Dia 0.280 in.From flange, right internal flange 1.600 in.Dia 0.090 in.W, three equally spaced slots 0.375 in.Dia end milled on right od 7 degrees right of mtg holes, three equally spaced slots 0.375 in.Dia end milled left side id 7 degrees left side id 7 degrees left of mtg holes; raised surface feature: included; aperture shape: round and included; aperture type: counterbored; material: cres, ams 5342 comp 17-4ph; shape: special
NSN
National Stock Number:
TXT
Description:
Bearing Retaining Plate
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
Between 2.250 inches and 2.252 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.260 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 3.495 inches and 3.515 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 3.495 inches and 3.515 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.280 inches and 0.296 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 1.850 inches and 1.851 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Single bolt hole circle
MRC:
The number of holes in a bolt circle.ADPM
Bolt Circle Hole Quantity:
3
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.100 inches and 0.110 inches
MRC:
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.AFFL
Mounting Bolt Circle Diameter:
3.125 inches
MRC:
A measurement from the bottom to the top of a raised surface,in distinction from depth.CKSR
Raised Surface Height:
Between 1.130 inches and 1.150 inches
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, unthreaded
First Raised Surface Outside Diameter:
Between 2.499 inches and 2.500 inches
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-i-6866 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
