Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Thermal Insulation Sleeving
MRC:
The number of individual thicknesses laid or lying over or under one another,regardless of the number of plies in each layer.AARM
Layer Quantity:
1
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Any acceptable
MRC:
A rating of the denseness or compactness of the material after fabrication.AARP
Material Density:
3.0 pounds per cubic foot
MRC:
The extent to which the material will support combustion /excludes all outer coverings/.AARQ
Flammability Rating:
Incombustible
MRC:
The type of protection the surface treatment or jacket provides.AARS
Outer Covering Environmental Protection:
Mildew resistant
MRC:
A measurement of the smallest dimension from the inner wall to the outer wall of the insulation,in distinction from length or width.AARU
Insulation Thickness:
0.500 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.750 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
12.000 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Split round
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Between -189.0 degrees celsius and 482.0 degrees celsius
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Flexible
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Glass fiber
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Resin synthetic
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
78741-36t26402-06c12 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
