Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Tempered tip, 1 white band
NSN
National Stock Number:
TXT
Description:
Measuring Pipet
MRC:
The designation derived from the name of the designer or use for which the item is intended.ANEH
Design Designation:
Mohr
MRC:
An indication of the marking(s) on the scale.ASTW
Scale Marking:
Every tenth graduation
MRC:
A measurement of the capacity of an item.BBLT
Capacity Rating:
Between 24.900 milliliters and 25.100 milliliters
MRC:
A designation of the function which is calibrated.BJBS
Calibration Function:
To deliver
MRC:
Indicates the type of container/s/ or supporting device/s/ which is in direct contact with the item.CQCT
Primary Container Type:
Package
MRC:
Indicates the increments of measure on the scale.CQPX
Scale Graduation Unit:
0.1 milliliters single interval single scale
MRC:
The number of items of supply within each primary container.CQTF
Primary Container Unit Quantity:
12
MRC:
The process used in marking the graduations on the item.CRLY
Graduation Marking Method:
Etched or fired stain
Scale Portion Outside Diameter:
12.00 millimeters
MRC:
Indicates the reading direction of the scale.CSTJ
Scale Reading Direction:
Top to bottom outside single scale
MRC:
Indicates the range of the increments of measure on the scale.CTBL
Scale Graduation Unit Range:
+0.0/+25.0 milliliters single interval single scale
MRC:
The measured weight of the exterior container.ECWT
Exterior Container Weight:
0.40 pounds
MRC:
A measurement of volume taken by multiplying the length by the width by the height of the exterior container and rendered in cubic units.EXME
Exterior Container Cubic Measure:
0.011 cubic feet
MRC:
The number of units of issue placed inside the exterior container.EXQT
Exterior Container Quantity:
1
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Glass, borosilicate
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Glass, borosilicate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Reduced mouth
MRC:
A measurement of volume taken by multiplying the length by the width by the height of the unit of issue and rendered in cubic units.SUCB
Unit Of Issue Cube:
0.011 cubic feet
MRC:
The measured weight of the actual container(s) or supporting device(s) which is in direct contact with the item and its contents.SUWT
Unit Of Issue Weight:
0.40 pounds
