Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Protrusion on one side of head 0.080 in. Min and 0.100 in. Maximum height, 0.050 in. Min and 0.070 in. Maximum width; agavgadvanced medium range air to air missile/lau 129a, end chamfered 45 degrees, flat edge 0.0675 in.
NSN
National Stock Number:
TXT
Description:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat fillister
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.245 inches and 0.255 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 0.574 inches and 0.576 inches
Undercut Diameter:
Between 0.210 inches and 0.212 inches
Under Head Length:
Between 1.282 inches and 1.302 inches
Undercut Width:
Between 0.029 inches and 0.032 inches
Pin Head Diameter:
Between 0.580 inches and 0.600 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.290 inches and 0.310 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 356.0 or aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 4260, t6 assn standard single material response or qq-a-225/8, t651 federal standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type ii, class 1 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
