Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Shank externally threaded per airesearch specification s-8086-074514-70210
NSN
National Stock Number:
TXT
Description:
Rod End Connector
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b rod connection
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand rod connection
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.880 inches rod connection and 0.940 inches rod connection
MRC:
The distance from the centerline to the axis of the item.ABGG
Radius:
Between 0.500 inches and 0.530 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
25.0 rockwell c and 40.0 rockwell c
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
0.743 inches
MRC:
A measurement taken at right angles to the length of a tongue,in distinction from thickness.AHHE
Tongue Width:
Between 1.000 inches and 1.060 inches
MRC:
A measurement of the smallest dimension of a tongue,in distinction from length or width.AHHF
Tongue Thickness:
0.315 inches
Shoulder Length:
Between 0.960 inches and 0.980 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the shank.ATCG
Shanklength:
Between 0.760 inches and 0.780 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane of a body.AZTN
Bodydiameter:
Between 0.850 inches and 0.870 inches
MRC:
The distance from the end of the item to the center of the hole.BFKT
Distance From End To Hole Center:
Between 1.590 inches and 1.610 inches
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.625 inches rod connection
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fed standard 66, aisi/sae federal standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc and chromate
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Magnetic particle inspection, mil-i-6868-81349
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Connector
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf rod connection
