Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Hydraulic Brak Cylinder Assembly
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Iron, cast
MRC:
The provision/s/ for mounting the item.ABDR
Mounting Provision:
Threaded mounting holes
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
Not rated
MRC:
A measurement of the longest dimension of a mounting facility,in distinction from width.ABKP
Mounting Facility Length:
2.250 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.445 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.670 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.188 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
1.500 inches
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJFY
Seat Angle In Deg:
37.0
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance,and an external or internal threaded mounting facility.AKBM
Mounting Facility Thread Class:
2b
MRC:
The direction of the threads of a mounting facility when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AKBN
Mounting Facility Thread Direction:
Right-hand
MRC:
A measurement of the smallest length to which the item may be compressed,in distinction from width.AMQZ
Compressed Length:
Any acceptable
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Straight
MRC:
A measurement of the longest dimension of an item when it is in an extended position,in distinction from width.ATEM
Extended Length:
Any acceptable
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting provision(s).BBBW
Mounting Provision Arrangement Style:
Two hole
MRC:
The installed position for which the item is designed.BBJX
Mounting Position:
Left
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale applied to a mounting facility diameter.CDTD
Mounting Facility Thread Series Designator:
Unc
MRC:
The length of a straight line which passes through the center of the mounting facility which would bound the crest of an external thread or the root of an internal thread.CDTF
Mounting Facility Thread Diameter:
0.313 inches
MRC:
The number of threads on the mounting facility per linear inch measured on a line parallel to the thread axis.CDTG
Mounting Facility Thready Qty Per Inch (tpi):
18
MRC:
An indication of the design characteristics of the item.CKSD
Design Characteristics:
Double acting single cylinder
MRC:
Indicates the type of mounting and the location on the item.CLML
Mounting Type And Location:
Flange center section
MRC:
The length of the threaded portion of the mounting facility.CLMN
Mounting Facility Thread Length:
0.500 inches
Center To Center Distance Between Mounting Provisions:
1.625 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the port.CLMT
Port Style:
Inverted flare
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the port.CLMW
Port Thread Series Designator:
Unf
MRC:
The length of a straight line which passes through the center of the port and would bound the crest of an external thread or the root of an internal thread.CLMX
Port Thread Diameter:
0.375 inches
MRC:
A measurement of the number of screw threads on the port per linear inch,including incomplete threads,on a line parallel to the thread axis.CLMY
Port Thready Qty Per Inch (tpi):
24
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal port thread.CLNB
Port Thread Class:
2b
MRC:
The number of bleeding features included.CLND
Bleeding Feature Quantity:
1
