Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
First step flat 0.140 in. Across
NSN
National Stock Number:
TXT
Description:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
Under Head Length:
Between 0.740 inches and 0.760 inches
First Step Diameter:
Between 0.175 inches and 0.181 inches
First Step Length:
Between 0.078 inches and 0.0821 inches
Second Step Diameter:
Between 0.1235 inches and 0.1240 inches
Second Step Length:
0.678 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
Between 0.033 inches and 0.037 inches
Distance From Centerline Of Hole To End Of Pin:
0.102 inches
First End Taper Length:
Between 0.010 inches and 0.030 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
45.0 rockwell c and 50.0 rockwell c
First End Taper Angle:
Between 43.0 degrees and 47.0 degrees
Pin Head Diameter:
Between 0.245 inches and 0.255 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
10.0 microinches large shank
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.050 inches and 0.070 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 615
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5616 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
