Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Fixture set
NSN
National Stock Number:
TXT
Description:
Aircraft Maintenance Fixture Set
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F110-ge-100 & f101-ge-102 engine
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Consists of a steel base plate with a machined pilot ring that is welded onto the plate and interfaces with the inside diameter of the shaft; base plate has 2 pin holes; a stainless steel conical shaped tube is bolted to a top plate; a long stud with a pinned knob; a stainless steel angle ring bolted to the base plate; test coupons located on the top of the fixture; 2 found bond test buttons which are held in place by 2 polytetrafluoroethylene holders; flat plate coupons held in place by 4 polytetrafluoroethylene holders; this item is 14.700 inch by 14.700 inch by 5.000 inch and weighs approximately 34 pounds
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Used to accomplish the repairs by positioning the shaft, covering unsprayed areas to prevent overspray and providing for placement of test coupons to monitor spray parameters; used for seal teeth restoration on outer diameter; in addition it is used to mask the seal teeth during grit blasting - in preparation for thermal spray
MRC:
Literature and references available for information pertaining to the item.RDAL
Reference Data And Literature:
Serd no. 1516a
