Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Center to center distance between smaller bolt holes along length is 1. 000 in.
NSN
National Stock Number:
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 5.910 inches and 5.970 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 4.140 inches and 4.200 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 2.970 inches and 3.030 inches
Outside Corner Radius:
0.250 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
Between 2.740 inches and 2.760 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
Between 3.990 inches and 4.010 inches
MRC:
The number of laminations provided.BRDX
Lamination Quantity:
38
MRC:
The distance between the opposite flat surfaces of the individual laminations.BRDY
Lamination Thickness:
0.003 inches
Smallest Bolt Hole Diameter:
Between 0.374 inches and 0.385 inches
Largest Bolt Hole Diameter:
Between 0.437 inches and 0.444 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
Laminated
Smallest Bolt Hole Quantity:
4
Largest Bolt Hole Quantity:
2
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/1 federal specification single material response
