Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
One hole 0.562 in. Min 0.567 in. Maximum through the longitudinal cent34
NSN
National Stock Number:
TXT
Description:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Dee
Distance From Centerline To Flat:
0.460 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.8100 inches and 0.8105 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 1.261 inches and 1.274 inches
Undercut Diameter:
Between 0.773 inches and 0.779 inches
Under Head Length:
1.410 inches
Undercut Width:
Between 0.046 inches and 0.049 inches
First End Taper Length:
0.030 inches
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
1.060 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches long shank
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.120 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130 or steel comp 8630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-675 military specification 1st material response or mil-s-6050 military specification 2nd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
