Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Contains 8 holes equally spaced 0.050 - 0.070 diameter at a 45 degrees angle from the top to 0.115 down side between each slot; item od 1.156 min; contains 2 grooves 0.132 - 0.134 wide with a diameter of 0.980 - 0.990. Threads are on end opposite drive end. Material is ams 5663.
NSN
National Stock Number:
TXT
Description:
Externally Threaded Ring
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
Between 0.015 inches and 0.025 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 0.150 inches and 0.170 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.570 inches and 1.690 inches
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
1.1875-12
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.840 inches and 0.850 inches
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
Between 0.190 inches and 0.210 inches
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Unj
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Slotted face
MRC:
Indicates the type and number of accommodations included.AWHW
Accommodation Type And Quantity:
8 slots
MRC:
An indication of the process applied to the bore edge.AWQA
Bore Edge Process:
Chamfered
MRC:
Indicates the location of the end on which the process is to be applied.AWQB
Process End Location:
End opposite drive end
