Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Connector-4 bearing oil scavenge
NSN
National Stock Number:
TXT
Description:
Flange To Tube Elbow
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3b 2nd end
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
3 1st end
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Engine, aircraft; f100-pw-229 f15e, f16c/d
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Swivel nut, flare (tube) style 3 optional end 2nd end
MRC:
A measurement of the longest dimension of the leg,in distinction from width.AHSJ
Leg Length:
1.477 inches 2nd end
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
2.393 inches 1st end
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
2.400 inches 1st end
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Triangular with holes 1st end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange 1st end
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12 2nd end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.0625 inches 2nd end
MRC:
The angle of the end surface upon which the mated surface seats.CQRB
Seat Angle:
45.0 degrees 2nd end
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
0.650 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
0.226 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.CWCT
Bolt Circle Diameter:
2.400 inches 1st end
MRC:
The design of the flange face.CWDF
Flange Face Design:
Raised with curve and radius 1st end
MRC:
A nominal measurement from the bottom to the top surface of a raised face,in distinction from depth.CWDH
Raised Face Height:
0.650 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of a raised face,and terminates at the circumference.CWDL
Raised Face Diameter:
1.585 inches 1st end
MRC:
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.CWFD
Outside Diameter Tube Accommodated:
0.491 inches 2nd end
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Casting per specification pwa 321 grade c; threads per pwa 355; classification of characteristics per specification pwa 397-4; ams 5362 superseded by sae-ams5362
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel elbow
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams-3562sst assn standard single material response elbow
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Oil single response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unj 2nd end
