Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
2 jack screw holes included
NSN
National Stock Number:
TXT
Description:
S Electrical Insulation Sleeving
MRC:
The maximum voltage the insulating materials of the item will withstand without resulting in disruptive discharge or deterioration,expressed in volts.AAPB
Dielectric Withstanding Voltage In Volts:
200.0
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-55.0 degrees celsius and 225.0 degrees celsius
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Any acceptable
Main Body Wall Thickness:
0.060 inches as supplied
Main Body Wall Thickness:
0.606 inches after unrestricted recovery
Main Bodylength:
2.750 inches after unrestricted recovery
Main Body Small End Inside Diameter:
0.870 inches after unrestricted recovery
Main Body Small End Inside Diameter:
3.120 inches as supplied
Main Body Large End Inside Diameter:
2.640 inches after unrestricted recovery
Main Body Large End Inside Diameter:
3.120 inches as supplied
Distance From Bottom Of Shoulder To Large End Of Main Body:
0.870 inches after unrestricted recovery
Distance From Top Of Shoulder To Small End Of Main Body:
0.900 inches after unrestricted recovery
MRC:
The percentage an item is rated to reduce in size upon the application of heat.AGAU
Heat Shrinkage Rating In Percent:
250.0
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
1500 pounds per square inch
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Semirigid
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyolefin
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyolefin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Boot-straight
