Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Groove Pulley
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
Between 0.9375 inches and 0.9485 inches
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
Between 0.365 inches and 0.395 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.3125 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
9.750 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.800 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
14
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
Between 0.815 inches and 0.820 inches
MRC:
The angle of the v groove,expressed in degrees.AGGS
V Groove Angle In Deg:
38.0
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Fsteel, carbon, 1010 through 1025, qq-s-634 or steel, carbon, qq-s-721 or tube, steel, carbon, mt1010 through mix1020 or 1022 or 1025 qq-t-830, rim, steel carbon, 4130 through 4135 qq-s-624, hub steel, carbon, qq-s-741, web
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
1.500 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Webbed
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Involute spline
MRC:
An indication of whether or not bearings are included.AWJQ
Bearings:
Not included
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.000 inches
MRC:
The number of grooves provided.AXHQ
Groove Quantity:
3
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Not included
MRC:
A measurement of the spline pitch diameter.BDTX
Spline Pitch Diameter:
0.8750 inches
MRC:
An indication of whether or not a split hub feature is included.BSYG
Split Hub Feature:
Not included
MRC:
An indication of the relationship between the webbing or spokes and the centerline of the face.BXSH
Web/spoke Relationship To Face Centerline:
Not offset
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
An indication of whether or not an integral cooling vane(s) is included.BXSK
Integral Cooling Vane:
Not included
MRC:
The physical configuration of the groove.BXSM
Groove Shape:
V
MRC:
An indication of whether or not a bore feature is included.BYDS
Bore Feature:
Included
MRC:
An indication of the characteristic of the protruding hub.BYDZ
Protruding Hub Characteristic:
Plain
Hub End Outside Diameter And Location:
1.283 inches aa end and 1.295 inches aa end
Distance From Outside Flange/rim To Hub End And Location:
1.500 inches aa end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Webbed or spoked
