Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Standoff bracket
NSN
National Stock Number:
TXT
Description:
Mounting Bracket
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
19.230 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
10.840 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
12.000 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
10
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Stryker fov
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
For surface treatment, hexavalent chromium process shall not be used. See dwg for optional material designations.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5083 or aluminum alloy 5086
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
H321, ams-qq-a-250/6 or astm b209. .250 thk for -1 assn standard 1st material response or h321. Ams-qq-a-250/6 or astm b209 assn standard 1st material response or h111 or h112. Ams-qq-a-200/4 or astm b221 assn standard 1st material response or h32. Ams-qq-a-250/7 assn standard 2nd material response or h32 or h116, astm b209. .250 thk for -1 assn standard 2nd material response or h111 or h112. Ams-qq-a-200/5 or astm b221 assn standard 2nd material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Paragraph 2.4, exterior paint system. Dwg 19207-12350824 mfr ref all treatment responses
