Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
4-1/2 digit display; maximum display 19999; three digit frequency setting; high speed measurements
NSN
National Stock Number:
TXT
Description:
Capacitance-inductance-re Bridge
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
16.750 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
7.400 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
16.666 inches
MRC:
The value,or range of values,of root mean square potential for which the item is rated.ACYN
Ac Voltage Rating:
Between 100.0 volts and 240.0 volts
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
Between 48.0 hertz and 66.0 hertz
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Analog test set; lantirn
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.AKYN
Furnished Items And Quantity:
Opt 909-rack/handle kit 1; opt 001-internal dc bias 1
MRC:
The minimum to maximum limits of the capacitance scale.AQYN
Capacitance Scale Range:
+0.0/+19999.0 microfarads
MRC:
The minimum and maximum deviation from the exact capacitance reading at full scale deflection,expressed in percent.AQYP
Capacitance Scaleaccuracy Rating In Percent:
+0.0/+1.0
MRC:
The minimum to maximum limits of the resistance scale.ARED
Resistance Scale Range:
+0.0/+10.0 megohms
MRC:
The minimum and maximum deviation from the exact resistance reading at full scale deflection.AREE
Resistance Scaleaccuracy Rating In Percent:
+0.0/+0.1
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Measures circuit components usingfrequency and dc bias conditions identical to intended application
