Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Quickclamp couples norgren excelon modular components for compressed air system; flanges on components slide into v grooves and sealed with face sealing o'rings; v groove depth is 0.102 inch
NSN
National Stock Number:
TXT
Description:
Quick Disconne Coupling Assembly
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.950 inches
MRC:
A measurement of the smallest dimension of the second end flange, in distinction from length or width.ACLZ
Second End Flange Thickness:
0.950 inches
MRC:
A measurement of the longest dimension of the second end flange, in distinction from width.ACMA
Err Default:
Err default
MRC:
A measurement taken at right angles to the length of the second end flange, in distinction from thickness.ACMB
Err Default:
Err default
MRC:
The means by which mechanical action completely engages or disengages a mating quick disconnect part.ADLN
Quick Disconnect Method:
Push-pull all ends
MRC:
The maximum temperature at which the item is rated to operate for an extended period of time.AEHZ
Maximum Operating Temp:
175.0 degrees fahrenheit single response
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Cart, support equipmen (se) b-2 bomber aircraft
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
Rectangular w/ out bolt holes first fluid end connection
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Swivel flange, raised first fluid end connection
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
2.000 inches
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
2.000 inches
MRC:
A measurement of the extent of complete /full/ internal threads,along a line parallel to the longitudinal axis of the first end.AMER
First End Internal Thread Length:
0.205 inches
MRC:
A measurement of the extent of complete /full/ internal threads,along a line parallel to the longitudinal axis of the second end.AMHP
Second End Internal Thread Length:
0.205 inches
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange first fluid end connection
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Identical
MRC:
The maximum pressure at which an item is rated to operate for each type of service with which an item may be used.CQCJ
Maximum Operating Pressure And Media For Which Designed:
250.0 pounds per square inch air
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
250.0 pounds per square inch single response
MRC:
A rating which expresses the degree of heat or cold as applied to the operation,or limitation of operation,for each type of service with which an item may be used.CRWH
Maximum Operating Tempurature And Media For Which Designed:
175.0 degrees fahrenheit air
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
0.950 inches
MRC:
A nominal measurement from the bottom to the top surface of a raised face,in distinction from depth.CWDH
Raised Face Height:
0.205 inches
MRC:
The nominal length of a straight line which passes through the center of a raised face,and terminates at the circumference.CWDL
Raised Face Diameter:
1.330 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Coupling assembly, threaded internal
