Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Angle Bracket
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Machined
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Fcase assembly, turbine; w/s: engine, aircraft tf33-pw-102 (c-135e, ec-135h/k/p); engine, aircraft, tf-33-p-7 (c-141a/b); aircraft, stratofortress b-52; engine, aircraft tf33-p-3/5/9 (c/ec-135, b-52h)
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Case assembly, turbine; w/s: engine, aircraft tf33-pw-102 (c-135e, ec-135h/k/p); engine, aircraft, tf-33-p-7 (c-141a/b); aircraft, stratofortress b-52; engine, aircraft tf33-p-3/5/9 (c/ec-135, b-52h)
Second Leg Width:
1.509 inches
Second Leg Corner Radius:
0.250 inches
First Leg Hole Diameter:
0.224 inches
Second Leg Hole Diameter:
0.286 inches
Second Leg Distance Between Hole Centers Along Width:
1.009 inches
Second Leg Distance From Edge To Hole Center Along Width:
0.250 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.250 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.062 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.062 inches
First Leg Width:
0.510 inches
First Leg Distance From Edge To Hole Center Along Width:
0.250 inches
First Leg Distance From Edge To Hole Center Along Length:
0.250 inches
First Leg End Radius:
0.375 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
130.0 degrees
Second Leg Offset Angle:
80.9 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 410
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset angle
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Engine, jet, aircraft