Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Reduced diameter one end 3.250 in. Diaby 0.860 in. Lg
NSN
National Stock Number:
TXT
Description:
Round Plain Nut
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
Drive Point Depth:
Between 0.427 inches and 0.447 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Round
Nut Diameter:
Between 3.470 inches and 3.530 inches
MRC:
A measurement between the opposite flat surfaces of the nut,in distinction from length or width.ADBG
Nut Thickness:
Between 1.177 inches and 1.197 inches
Drive Point Width:
0.240 mils and 0.260 centimeters
MRC:
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.AGGP
Drilled Hole Diameter:
0.062 inches
MRC:
Indicates the type and number of holes provided.ALET
Hole Type And Quantity:
12 drilled
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Un
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
16
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
2.625 inches
MRC:
The style designation that most nearly corresponds to the appearance of the hole configuration.CRHC
Hole Configuration Style:
Configuration f
MRC:
The included angle of the countersink.CRSQ
Countersink Angle:
89.5 degrees nut and 90.5 degrees nut
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130 or steel comp 4140 or steel comp 8630 or steel comp 8740
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6758 military specification 1st material response or mil-t-6736 military specification 1st material response or mil-t-6756cancelled military specification 1st material response or mil-s-5626 military specification 2nd material response or mil-s-6050 military specification 3rd material response or mil-s-6049 military specification 4th material response
