Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Fluid Passage Bolt
Concentric Hole Depth:
0.980 inches
Concentric Hole Diameter:
Between 0.172 inches and 0.178 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.454 inches
MRC:
A narrative description of the type of end connection.ACKM
First End Connection Type:
Threaded external tube
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.688 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
0.331 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Hexagon
First Diameter From Wrenching Feature:
Between 0.325 inches and 0.327 inches
Second Diameter From Wrenching Feature:
Between 0.434 inches and 0.435 inches
Third Diameter From Wrenching Feature:
Between 0.325 inches and 0.327 inches
Fourth Diameter From Wrenching Feature:
Between 0.434 inches and 0.435 inches
Fifth Diameter From Wrenching Feature:
Between 0.325 inches and 0.327 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
0.094 inches
Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter:
0.330 inches
Length From Bearing Surface Of Wrenching Feature To End Of Third Diameter:
0.530 inches
Length From Bearing Surface Of Wrenching Feature To End Of Fourth Diameter:
0.860 inches
Length From Bearing Surface Of Wrenching Feature To End Of Fifth Diameter:
0.935 inches
First Radial Fluid Hole Diameter:
Between 0.172 inches and 0.178 inches
Distance From First Radial Hole Center To End Of Bolt:
0.836 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
1.266 inches
Wrenching Feature Height:
0.188 inches
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
115000 pounds per square inch
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
23.0 rockwell c
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CQKK
First End Thready Qty Per Inch (tpi):
20
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.437 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6758, cond c4 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
