Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Two corners beveled along same side, other corners have greater bevel, 0.690 in. Long and deep. Rounded cut-out section
NSN
National Stock Number:
TXT
Description:
Plate Spacer
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.208 inches and 0.214 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 3.140 inches and 3.200 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.270 inches and 1.330 inches
Outside Corner Bevel Length Along Width:
Between 0.170 inches and 0.230 inches
Outside Corner Bevel Length Along Length:
Between 0.170 inches and 0.230 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
Between 2.400 inches and 2.420 inches
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.890 inches and 0.950 inches
Bolt Hole Centerline To Nearest Edge Distance:
0.920 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
2
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 7075
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/12 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
St-37-307, fscm 98897 mfr ref single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular w/beveled corners
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Nlg kneeling door, folding bhd
