Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
4-40 unc-2b thds 0.080 in. Min dp both ends
NSN
National Stock Number:
TXT
Description:
Hollow Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered and counterbored
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.062 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
0.052 inches
Second Hole Diameter:
0.052 inches
Distance From Centerline Of Hole To End Of Pin:
0.188 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
0.437 inches
MRC:
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.ACHT
Pinlength:
0.843 inches
MRC:
The overall length of a straight line which passes through the center of the pin,and terminates at the outside circumference.ACHU
Pindiameter:
Between 0.2480 inches and 0.2485 inches
First End Counterbore Diameter:
0.112 inches
First End Counterbore Depth:
0.140 inches
First End Taper Length:
0.032 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Identical
First End Taper Angle:
45.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 416
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5610 assn standard single material response
