Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
First end partial bore, 0.500 in. Dia, 6.000 in. Dp; first end counterbored, 0.875 in. Dia, 1.000 in. Dp; first end has a 0.750 in. R, 0.210 in. Dp
NSN
National Stock Number:
TXT
Description:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Plain
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved, cross drilled hole, and externally threaded
Second End Groove Width:
Between 0.1800 inches and 0.2100 inches
Second End Groove Diameter:
Between 0.7630 inches and 0.7730 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
13.4480 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 1.2457 inches and 1.2475 inches
Second End Distance From End To Groove:
Between 0.640 inches and 0.670 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.8711 inches and 0.8725 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
Between 0.1270 inches and 0.1330 inches
Second End Distance From Hole Center To End:
0.330 inches
Second End External Thread Length:
Between 0.640 inches and 0.670 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
2
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 1.245 inches and 1.247 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 13-8ph
