Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Rshank end diameter opposite third step, 0.1970 in. Min, 0.1975 in. Maximum with 32.0 microinch surface finish; second step dia, 63.0 microinch; third step, 32.0 microinch; shank end opposite third step excluded from chromium plate
NSN
National Stock Number:
TXT
Description:
Headless Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square
MRC:
The shortest distance from one flatted surface of the shoulder to the opposite flatted surface.AAVJ
Shoulder Width Across Flats:
0.245 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.450 inches
First Step Diameter:
Between 0.310 inches and 0.320 inches
First Step Length:
Between 0.095 inches and 0.105 inches
Second Step Diameter:
Between 0.235 inches and 0.245 inches
Second Step Length:
Between 0.425 inches and 0.475 inches
Third Step Diameter:
Between 0.183 inches and 0.193 inches
Third Step Length:
Between 0.620 inches and 0.680 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
Between 0.065 inches and 0.075 inches
Distance From Centerline Of Hole To End Of Pin:
0.070 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Identical
MRC:
Indicates the location of the first end.CRDY
First End Location:
Both ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5645 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Ams2406 assn standard single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
