Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
2 parallel flats 0.310 in. W between flats, 0.250 in. Lg, second step
NSN
National Stock Number:
TXT
Description:
Eccentric Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat fillister
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.750 inches
Offset Distance Between Geometric Center Of Head And Centerline Of Shank/shoulder:
Between 0.125 inches and 0.156 inches
First Step Diameter:
0.810 inches
First Step Length:
0.740 inches
Second Step Diameter:
Between 0.458 inches and 0.460 inches
Second Step Length:
0.380 inches
Third Step Diameter:
0.310 inches
MRC:
The number that designates the enlarged portion of the shank whose centerline is not collinear with the centerline of the head of an item.ACHW
Numeric Designation Of Step Eccentric To Head:
1
Pin Head Diameter:
Between 0.458 inches and 0.460 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.380 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6758, cond f4 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2, cl 2 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Eccentric
