Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Flat keyway
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved woodruff keyway and externally threaded
Second End Groove Width:
Between 0.1240 inches and 0.1255 inches
Second End Groove Diameter:
0.2700 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 10.055 inches and 10.115 inches
MRC:
A measurement taken at right angles to the length of the keyway at the first end,in distinction from thickness.AMCZ
First End Keyway Width:
Between 0.1863 inches and 0.1880 inches
First End External Keyway Length:
0.750 inches
MRC:
A measurement between specified points of the keyway at the first end.AMDG
First End Keyway Depth:
Between 0.104 inches and 0.109 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.6240 inches and 0.6245 inches
Second End Distance From End To Groove:
0.725 inches
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
Between 0.1240 inches and 0.1255 inches
Second End External Keyway Length:
0.502 inches
Second End Distance From Keyway Center To End:
1.105 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.6240 inches and 0.6245 inches
Second End External Thread Length:
0.725 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
3
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.872 inches and 0.878 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, cres ph13-8 mo.
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Spec ams 5629 federal specification single material response
