Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Two 0.094 in. Min, 0.097 in. Maximum diameter holes spaced 0.664 in. And 1.110 in. From first end, two 0.029 in. Min, 0.032 in. Maximum w grooves spaced 1.280 in. And 1.560 in. From second end
NSN
National Stock Number:
TXT
Description:
Straight Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Unthreaded cross drilled
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Two circular grooves
Second End Groove Width:
Between 0.0290 inches and 0.0320 inches
Second End Groove Diameter:
Between 0.2880 inches and 0.2920 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.125 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.3145 inches and 0.3150 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
Between 0.0940 inches and 0.0970 inches
First End Distance From Hole Center To End:
Between 0.216 inches and 0.220 inches
Second End Distance From End To Groove:
0.125 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.3145 inches and 0.3150 inches
Second End Distance Between First And Second Groove Centers:
Between 0.557 inches and 0.564 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302 or steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-w-423, form 1, condition a federal specification single material response or qq-s-763 condition a, class 1, type d federal specification single material response
