Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Nonmetallic Channel
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Semi-closed channel
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
60.0 shore durometer a and 70.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
1500 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-40.0 degrees celsius
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.180 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.730 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
1.060 inches
Right Side Flange Height:
0.045 inches
Left Side Flange Thickness:
0.100 inches
Right Side Flange Thickness:
0.100 inches
Left Side Top Flange Thickness:
0.075 inches
Right Side Top Flange Thickness:
0.075 inches
Left Side Top Flange Width:
0.200 inches
Right Side Top Flange Width:
0.200 inches
Fillet Radius Where Left Flange Joins Top Flange:
0.023 inches
Fillet Radius Where Right Flange Joins Top Flange:
0.023 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Hydraulic fluid and oil resistant and low temperature
Fillet Radius Where Left Flange Joins Base Flange:
0.023 inches
Base Flange Thickness:
0.060 inches
Fillet Radius Where Right Flange Joins Base Flange:
0.023 inches
MRC:
The style designation corresponding to the shape of the left-side flange tip.BHQU
Left-side Flange Tip Style:
Left square end
MRC:
The style designation corresponding to the shape of the right-side flange tip.CZLZ
Right-side Flange Tip Style:
Right square end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Hs244, united aircraft corporation mfr ref single material response