Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Shaft Collar
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.630 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
Between 0.248 inches and 0.252 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.4998 inches and 0.5069 inches
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
2
MRC:
A measurement of the amount of turning necessary to bring one hole into coincidence with another,expressed in degrees.AHYG
Angle Between Centerlines Of Securing Holes In Deg:
180.0
MRC:
Indicates the type of securing hole and the location.CQKB
Securing Hole Type And Location:
Unthreaded all holes
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the inside circumference,and the location.CRZW
Hole Diameter And Location:
0.1005 inches all holes and 0.1015 inches all holes
MRC:
Designates the specific roughness rating representing the arithmetic average deviation of the surface from the meanline in profile,and its location on the item.CSFN
Surface Finish And Location:
125 microinches both bearing flats
MRC:
Designates the specific roughness rating representing the arithmetic average deviation of the surface from the meanline in profile,and its location on the item.CSFN
Surface Finish And Location:
63 microinches inside periphery
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, qq-s-763, class 304 or steel, qq-s-764, type 303se-canceled
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304 or steel comp 303se
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763, class 304 federal specification 1st material response and qq-s-764, type 303se-canceled federal specification 2nd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain round
