Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
An/tpn-3 (v) 7
NSN
National Stock Number:
TXT
Description:
Double Angle Bracket
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 0.97 inches and 1.03 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 0.97 inches and 1.03 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Slide rail, jack plate, rear (driver side)
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.18 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.18 inches
Center Section Height:
Between 0.72 inches and 0.78 inches
Center Section Width:
Between 16.58 inches and 16.64 inches
Center Section Thickness:
0.44 inches
First Leg Width:
Between 16.58 inches and 16.64 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
No hole
MRC:
The number of holes provided.ASXK
Hole Quantity:
3
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Identical
First Leg Angle:
90.0 degrees
Second Leg Angle:
90.0 degrees
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Finish is iridite coat, then prime and paint. Bracket has (3) total mounting holes that have .20 inch diameter .65 inches deep with .25-20unc threading .50 inches deep.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Adjacent angles
