Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
4th flat groove, 4.000 in. Center to center from 3rd flat groove; 2nd cross drilled hole 2.692 in. From center of hole to 1st end, 0.250 in. Dia
NSN
National Stock Number:
TXT
Description:
Straight Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Cross drilled and circular grooved
First End Groove Width:
0.0990 inches
First End Groove Diameter:
0.6400 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Three flat grooves
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
18.380 inches
First End Distance From End To Groove:
2.281 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.7490 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
0.3750 inches
First End Distance From Hole Center To End:
0.380 inches
Second End Distance From End To Flat:
0.500 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.7490 inches
Second End Distance Between First And Second Groove Centers:
4.000 inches
Second End Grooved Flat Depth:
0.134 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-764 federal specification single material response
