Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
First end style chamfered 0.010 min to 0.015 maximum in. By 45.0 deg; second end style tongue-one side notched w/ 90.0 degrees angle; passivated finish per qq-p-35, type ii (collins 580-0025-000)
NSN
National Stock Number:
TXT
Description:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Plain
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Tongue
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.673 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.1246 inches and 0.1250 inches
Second End Tongue Thickness:
Between 0.156 inches and 0.157 inches
Second End Tongue Width:
0.437 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.2809 inches and 0.2813 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
2
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.280 inches and 0.281 inches
Second End Step Length:
Between 0.050 inches and 0.053 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763, class 303 federal specification all material responses
