change location
321-802-5889
321-733-7477
Part Information
Fiber optic cable should consist of a single fused silica, partially graded index; glass clad fiber surrounded by silicone coating; buffer jacket; and tensile strength members; then covered by scuff-resistant outer jacket; propagation delays increase at 5 ns per meter of cable length increase; data rate: as limited by pulse width distortion, is not affected by increasing cable length, if the optical power level is maintained; propagation delay 6 ns; cable length shall be 11.500 to 12.000 inches ; forward peak current: should not be less than 10.0 ma, in the on state with no duty factor restriction; operating temperature: minus 20.0 to plus 70.0 degrees celsius max; flexing: 180.0 degrees bending at bend radius of 20.0 mm no load, to a tensile load of 2.25 pounds max; cable connectors 0.300 to 0.330 inches hex ; thread ends are 0.250-36 unf-2b
| Part Number | RNVC | RNAAC | DAC | CAGE |
|---|---|---|---|---|
| 5788413-7 | 2 | TX | A | 53711 |
| QFBR-3046 | 2 | TX | A | 50434 |
| Code | Definition |
|---|---|
| FN | Factory New. Parts manufactured by then OEM and includes manufacturer certification. |
| NE | New. Parts manufactured by the OEM. May include manufacturer certification or company certification. |
| NS | New Surplus. New material item purchased from excess inventory. |
| OH | Overhauled. Product has been rebuilt and tested in accordance with the manufacturer's specifications by a repair shop (MRO). |
| SV | Serviceable product. |
| AR | As Removed. Product removed from aircraft or platform with no guarentee on the functionality of the part. |
| RP | Repairable. Product can be repaired by a MRO and be given a FAA 8130 or EASA Form 1 certification. |