Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Bracket, manifold mounting
NSN
National Stock Number:
TXT
Description:
Angle Bracket
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
2.750 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
8.000 inches
Second Leg Width:
4.000 inches
Second Leg Corner Radius:
0.500 inches
First Leg Hole Diameter:
0.250 inches
Second Leg Hole Diameter:
Between 1.490 inches and 1.510 inches
Second Leg Distance Between Hole Centers Along Width:
2.625 inches
Second Leg Distance Between Hole Centers Along Length:
3.125 inches
Second Leg Distance From Edge To Hole Center Along Width:
0.812 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.938 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.380 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.125 inches and 0.380 inches
First Leg Width:
3.515 inches
First Leg Distance Between First And Second Hole Centers Along Width:
1.250 inches
First Leg Distance Between Second And Third Hole Centers Along Width:
1.750 inches
First Leg Distance From Edge To Hole Center Along Width:
0.255 inches
First Leg Distance From Edge To Hole Center Along Length:
0.342 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Cut out
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Three holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Four holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
First Leg Cutout Length:
0.750 inches
First Leg Cutout Width:
0.750 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Holes on first leg are threaded .250-20 unc-2b and cutout starts 1.51 from top edge; second leg has 2 additional holes, 1.500 in diam, centered 2.500from open end and 1.00 from either side; second leg tapers from 0.38 for 2.94 inches from angle to 0.125 for last 4.560 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-t-9046, comp 6al/4v military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
