Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Has 0.062 inch chamfer of 45 degrees on inserted end; has 0.031 inch chamfer of 45 degrees on both sides of other end
NSN
National Stock Number:
TXT
Description:
Rod End Connector
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
Between 0.625 inches and 0.626 inches
MRC:
A measurement of the longest dimension of the slot,in distinction from width.ABGD
Slot Length:
Between 0.740 inches and 0.745 inches
MRC:
The distance from the centerline to the axis of the item.ABGG
Radius:
0.625 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABHC
Overall Width:
Between 0.740 inches and 0.745 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
W/s: los angeles class ssn (688)
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
1.000 inches
MRC:
The length of a straight line which passes through the center of a securing pin hole,and terminates at the circumference.AKYE
Securing Pin Hole Diameter:
Between 1.625 inches and 1.626 inches
MRC:
The distance along a straight line from the rod connecting end at right angle to the geometric axis of the securing pin hole center.AKYH
Distance From Center Of Securing Pin Hole To Rod End:
2.375 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the shank.ATCG
Shanklength:
1.625 inches
MRC:
The physical configuration of the hole.BCLP
Hole Shape:
Slotted
MRC:
The distance from the end of the item to the center of the hole.BFKT
Distance From End To Hole Center:
2.375 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.CTHX
Overall Height:
1.125 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140 or steel comp 4142
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm-a193, gr b7 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Connector